Zte Mf10 | Upgrade Firmware

Set your wireless encryption to WPA2-PSK (AES) or WPA3 if available. Avoid using outdated WEP or WPA-TKIP security, as they slow down your wireless speeds.

Open a web browser and enter the default IP address: 192.168.0.1 (or check the sticker on the bottom of the router). Log in with the default password (usually admin ).

After the ZTE MF10 restarts:

Wait for the progress bar to reach 100%. The router will automatically reboot. Method B: Via the Executable Update Tool

: If the online update isn't working, check the ZTE Support site for manual offline firmware packages. zte mf10 upgrade firmware

ZTE-MF10-FW-2024-01 Product: ZTE MF10 4G LTE Mobile Hotspot Target Audience: Network Administrators, End Users, Technical Support

If that address does not load, try the secondary default: http://192.168.1.1 3. Log In to the System Set your wireless encryption to WPA2-PSK (AES) or

Before starting any firmware update, a few preparatory steps are essential to ensure the process goes smoothly.

If an update is found, follow the on-screen prompts to download and install it. 4. Manual Firmware Upgrade Log in with the default password (usually admin )

Allow the device to complete the process. Do not power off the router during this time. Method 2: Offline Update (Using a Firmware File)

Upgrading the ZTE MF10 can extend the life of the device and improve modem compatibility, but it requires the specific BIN file matching your hardware version. Always use a wired connection and ensure stable power to avoid bricking the device.