Zk-5kx Manual |verified|

: Output is OFF by default at power-up. 1 : Output is ON by default at power-up. LUP Low Voltage Protection

Switch to the current setting and adjust it to your desired charging current (e.g., 1.0A).

| Parameter | Value | |-----------|-------| | Operating voltage | 12–24V DC | | Standby current | < 50 mA | | Active current | < 150 mA | | User capacity | 500 (PIN only) / 1000 (PIN+card) | | Card frequency (RFID model) | 125 kHz (EM) or 13.56 MHz (MF) | | Relay contact rating | 2A @ 30V DC (resistive) | | Working temperature | -20°C to +60°C | | IP rating | IP65 (weather-resistant) | Zk-5kx Manual

Turn the knob to set your maximum current limit (Constant Current threshold).

Before using the ZK-5KX, please ensure you follow these safety precautions: : Output is OFF by default at power-up

Long press the encoder knob for 2 seconds to save all changes and return to the home screen. 5. Built-in Safety Features and Error Codes

The drive does not push the ship. Instead, it subtly alters the gravitational constant ($G$) in the local vector field. By increasing $G$ in front of the vessel and decreasing it behind, the ship "falls" forward continuously, achieving high-velocity travel without the sensation of acceleration (inertial dampening is natural to the system). | Parameter | Value | |-----------|-------| | Operating

The manual emphasizes :

Long press : Cycles the top display between Input Voltage ( IN ), Output Voltage ( OUT ), and Board Temperature.