Xnx Universal Transmitter Quick Start Guide 2021 | Latest & Recommended

: Ensure unused conduit entries are sealed with certified, explosion-proof blanking plugs. Pipe and Wall Mounting

Connect to +24V DC nominal power source (acceptable range: 16-32V DC).

Ensure the transmitter is powered off before connecting or swapping a sensor. Xnx Universal Transmitter Quick Start Guide

Attach the internal or external earth ground wire to the dedicated grounding screw to reduce electromagnetic interference. Optional Relays and Modbus Connections

Use the integrated mounting lugs on the enclosure back to mark your drill holes. : Ensure unused conduit entries are sealed with

: Install the housing with the main sensor port pointing downward to prevent water or dust accumulation on the sensor element.

Before initiating installation, ensure the area is non-hazardous or that proper hot-work permits are obtained. Critical Safety Rules Attach the internal or external earth ground wire

: Tighten the cover until the O-ring seals completely. Apply Power : Turn on the 24 VDC supply line.

[ POWER & SIGNAL TERMINALS ] +-----+-----+-----+-----+-----+-----+ | 1 | 2 | 3 | 4 | 5 | 6 | +-----+-----+-----+-----+-----+-----+ 24V_V+ 0V 4-24mA A B GND (Signal) [ HART/ ] [Modbus RS485] Power Supply Wiring The transmitter requires a nominal 24V DC power source. Connect to +24V DC (range: 16V to 32V DC). Connect Terminal 2 to 0V / Common.