: Tracks speed, current, and torque in real-time to optimize drive performance.
Switch to the within Starter, assume control priority (Master Control), and turn the drive on. The drive will inject current into the motor to measure winding resistance and leakage inductance. Ensure the motor shaft is safe to move if performing a rotating measurement! Step 5: Fine-Tuning with the Trace Function Open the Trace folder under your drive unit.
: Select the drive family (e.g., SINAMICS S120) and the Control Unit (e.g., CU320). This is where the project navigator appears, allowing you to expand the tree to access the drive unit. sinamics starter v54
To ensure a smooth installation and reliable online communication with physical drives, your engineering PC must meet specific prerequisites. Hardware Requirements
Always install Starter before installing TIA Portal to avoid DLL conflicts. If you already have TIA, install Starter anyway; they can coexist if you manage the version dependencies carefully. : Tracks speed, current, and torque in real-time
: Supports the latest Siemens drive hardware hardware updates.
If you are currently running an older version of Starter (such as V4.4 or V5.2), upgrading to V5.4 is highly recommended if: Ensure the motor shaft is safe to move
SINAMICS Starter V54 is not glamorous. It has a dated grey interface reminiscent of Windows XP. It lacks the shiny icons of modern software. But for the engineer standing in front of a screaming SINAMICS S120 cabinet in a steel mill, it is the most reliable tool in the bag.
Guided prompts lead users through motor data entry, limit settings, and control modes.