Repartition Operation Failed Odin ((free)) (2026)

Use CSC_*** (not HOME_CSC_*** ) to force a clean repartitioning and factory reset.

: Low-quality USB cables or ports can interrupt the data transfer mid-operation, resulting in a write failure.

Work through these troubleshooting steps sequentially, starting with the simplest hardware checks and moving up to advanced firmware flashing. Step 1: Optimize Your Hardware Connection

Most modern Samsung firmware comes in a zip with five files (BL, AP, CP, CSC, and HOME_CSC). If you use the repartition operation failed odin

file to fix a "brick," you should never have this box checked. Swap Cables and Ports

You might be trying to flash firmware meant for a different model variant (e.g., trying to put T-Mobile software on an international model). Locked Bootloader:

If you are trying to flash firmware, root, or install a custom recovery (like TWRP) on a Samsung device using Odin, encountering the error can be stressful. This error typically signifies that Odin cannot partition your device’s storage to install the new files, often leading to a boot loop or a "Firmware upgrade encountered an issue" screen. Use CSC_*** (not HOME_CSC_*** ) to force a

Download the exact 4-file stock firmware for your specific model number.

<ID:0/005> Set PIT file.. <ID:0/005> DO NOT TURN OFF TARGET!! <ID:0/005> FAIL! <ID:0/005> Re-Partition operation failed. <OSM> All threads completed. (succeed 0 / failed 1)

The firmware version, carrier variant, or region (CSC) you are trying to flash does not match your device's exact hardware model. Step 1: Optimize Your Hardware Connection Most modern

As if on cue, the monolith spoke. Not through speakers. It spoke inside their teeth, inside their marrow, a frequency that bypassed ears and drilled straight into the hindbrain.

: Use the original Samsung USB cable and connect it to a direct USB 2.0 port on the back of your PC rather than a front-panel hub.

Marcus stared. “What?”

: Data corruption during transit is incredibly common. Damaged cables, loose USB ports, or outdated Samsung USB drivers can corrupt the partition commands midway through execution.

If Odin continues to fail, consider alternative tools: