This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Power was cut mid-update or wrong firmware version was used.

: Do not power off the device during the 3–4 minute process.

Here is the standard procedure to update your device:

Use a high-speed MicroSD card (Class 10, U3, or V30 speed rating) with a capacity between 32GB and 128GB. Lower-grade cards fail during deep read/write cycles, which can corrupt the firmware transmission. 3. Secure a Stable Power Supply

After updating, "Forget" the OBDPEAK Bluetooth connection on your phone and pair it again from scratch. Final Maintenance Tip

: If the device keeps trying to update, you likely forgot to remove the SD card or restore it to a normal state. Bricked Device : If the screen remains black, some users resort to using a ROM writer

Ensure the file is unzipped and sits in the root directory, not a subfolder. Double-check that your SD card is formatted correctly to FAT32 or exFAT. The Screen Went Black and Won't Turn On (Bricked Device)

Contact the official OBDPEAK customer support team via their official store (Aliexpress, Amazon, or their official website).

Ensure the file name is correct and the SD card is FAT32. If it still doesn't work, try a different, smaller SD card (16GB or 32GB).

After a major firmware update, perform a "Factory Reset" via the Settings menu. This clears any residual configuration variables from the old firmware that might cause conflicts.

: You will need a microSD card (32GB or less is recommended) formatted to FAT32 . Step-by-Step Update Process Updating the is generally performed via the microSD card slot: Update printer firmware | HP printers | HP Support

Navigate to on your OBDPEAK K2 screen. Note down your current build version number. Hardware variants change mid-production; flashing firmware meant for a different hardware revision will disable the touch screen or camera sensors. Step-by-Step Installation Guide

Maybe your scanner suddenly stopped connecting to your phone, or perhaps a specific feature (like live data streaming or ABS bleeding) is glitching. In most cases, the culprit is outdated or corrupted firmware.