Connect the Power LED wire. Pin 2 is Positive (+), Pin 4 is Negative (-).
If you encounter boot issues after a hardware change, use the JBAT-1 jumper to reset the BIOS settings to factory defaults.
The G41 chipset supports a maximum of 4 GB per rank, but only certain double-sided DIMMs. Install RAM in DIMM1 (black slot) first. Use only 2Rx8 modules, not 1Rx4. ms-7613 ver 1.1 motherboard manual
Is there something specific you would like to add or any changes you would like to make?
: Use the JPD1 jumper to erase forgotten passwords by following the same pin-bridging procedure. Connect the Power LED wire
Before we dive into the manual, let's take a look at some of the key features of the MS-7613 Ver 1.1 motherboard:
Pins 6 and 8 (No polarity requirement) HDD LED (HD_LED): Pins 1 (+) and 3 (-) Reset Switch (RST): Pins 5 and 7 (No polarity requirement) Key Pin (Missing): Pin 9 2. Audio and USB Internals The G41 chipset supports a maximum of 4
The MS-7613 board is anchored by the and powered by the Intel H57 Express chipset , catering to first-generation Intel Core architecture. MSI MS-7613 VER: 1.0 (HP OEM) - The Retro Web
Motherboard supports the following processor upgrades: * Intel Core i7-8xx (Lynnfield core) * Intel Core i5-7xx (Lynnfield core) * HP Support Community MSI MS-7613 VER: 1.0 (HP OEM) - The Retro Web