200°C to 480°C (392°F to 896°F) Soldering Iron Output Voltage: 24V AC (Safety voltage) Tip-to-Ground Resistance: Under 2 Ohms Unboxing and Critical First-Time Setup
The Gordak 952 has the following technical specifications:
If you need specific guidance, please tell me if you are looking to troubleshoot a heating issue or need help replacing the heating element. Share public link
The front panel of the Gordak 952 features intuitive, separate controls for both the hot air and soldering iron functions. gordak 952 user manual updated
Adjust the to a medium setting (4 or 5). Never operate the heater with the air volume set to zero, as this will instantly burn out the heating element.
The soldering iron handles traditional through-hole soldering, wire tinning, and manual SMD joint touching. Flip the soldering iron switch to "ON."
Always leave a generous blob of fresh solder on the soldering tip before turning off the machine to protect it from oxidation. 200°C to 480°C (392°F to 896°F) Soldering Iron
feature intelligent PID temperature control, dual LED digital displays, and microcomputer-driven safety functions. Hot Air Gun Soldering Iron Power Consumption 270W – 650W 50W – 60W Temperature Range 100°C – 500°C 200°C – 480°C Airflow Capacity 0.3 – 120 L/min (Max) Pump Type Diaphragm Pump 2. Setup and Controls
Controls the heating element and pump for the air gun.
, follow these critical safety guidelines provided in the Gordak 952 User Manual : Never operate the heater with the air volume
Keep flammable chemicals (like isopropyl alcohol or flux sprays) away from the open hot air stream.
Set the knob to a medium setting (e.g., position 4 or 5) to ensure initial airflow. Set the HEATER knob to your desired temperature.