Gmr-32b Phase Controller Manual !link!

Route your raw three-phase power lines (L1, L2, L3 or R, S, T) directly to the sample input terminals on the controller.

The GMR-32B controller performs three primary functions:

Snap the base directly onto a standard 35mm DIN Rail (HT35). Ensure the locking mechanism firmly secures the housing. gmr-32b phase controller manual

Slowly scale up your control input (e.g., raise the PLC output from 4mA to 20mA).

The (also known as a phase monitoring or sequence relay) is a protection device for three-phase systems. It is primarily used to detect faults such as overvoltage, undervoltage, phase loss, and incorrect phase sequence. Route your raw three-phase power lines (L1, L2,

If using single-strand solid wire, strip 8mm of insulation and insert it directly into the sampling terminals.

Check control circuit fuses, transformer output, and terminal connections. Unstable input control signal or phase sync loss. Slowly scale up your control input (e

: It features an easy-to-read LED display system that indicates the exact status or fault type, allowing for rapid troubleshooting. Compact Installation : At roughly mm, it fits easily onto standard HT35 DIN rails or can be screw-mounted using M4 holes. Manual Highlights & Technical Specs Specification Rated Voltage is less than or equal to 460 VAC (suitable for 380V standard) Connection Wire Insulated copper wire (1.0~2.5mm) Mounting Options HT35 DIN rail or direct screw mounting Primary Use Cases Air compressors, oil pumps, cranes, and HVAC units Pros and Cons High Reliability

Alternatively, use the slide-out accessories at the bottom of the device to secure it directly to the backplate using two M4 screws. ⚡ Step 2: Main Circuit Connections