Even with careful planning, installation challenges can arise. The service manual includes comprehensive troubleshooting guides, but understanding common issues can help expedite resolution.
Technicians frequently share information on professional forums. These can be valuable for troubleshooting and networking.
: Configure the tube parameters within the service software. Automatic Calibration : Many DRGEM systems, like the GXR-S, feature automatic calibration drgem x ray service manual install
Stationary units typically require a 220-volt receptacle . High-capacity systems may need a three-phase, 400/440V AC supply with 30-50 KVA capacity. Phase 2: Hardware Assembly The assembly of components like the TS-FC2 Tube Stand and the WBS Wall Stand involves critical safety steps:
The installation space must accommodate the chosen system configuration. DRGEM offers flexible mounting options including ceiling-mounted rail systems, floor-to-wall ceiling rails, and floor-mounted rail configurations. Ceiling and floor-mounted setups ensure seamless integration into any clinical or diagnostic environment. These can be valuable for troubleshooting and networking
Configure the generator to communicate with the flat panel detector (FPD).
A successful installation requires strict adherence to environmental, electrical, and room safety standards before unpacking the equipment. Environmental Conditions 10°C to 40°C (50°F to 104°F). Relative Humidity: 30% to 75% (non-condensing). Atmospheric Pressure: 700 hPa to 1060 hPa. Electrical Power Specifications High-capacity systems may need a three-phase, 400/440V AC
Physical installation involves positioning the main generator unit, mounting the tube support structure (ceiling rail, floor stand, or U-arm configuration), installing the patient table and wall Bucky stand, and setting up the flat panel detector and workstation. Each component has specific mounting requirements and alignment procedures that must be followed precisely.
The physical setup follows a specific assembly sequence for the tube and generator components: Tube Assembly
Establish a solid ground connection for all components to eliminate electrical noise in the digital images.