Disco 240 Dmx Controller Manual |top|

Check DMX address mapping, cables, and ensure the controller is not in Program Mode.

Repeat this process to build up to 8 unique scenes within your chosen bank. Phase 3: Building a Chase

Even the best lighting technicians run into hiccups. If your lights are misbehaving, check this checklist:

If you want, tell me the exact model label text on your unit (e.g., manufacturer and full model number) and I’ll fetch model-specific steps or common menu sequences. disco 240 dmx controller manual

Use the buttons to navigate to the bank containing your desired scene.

Verify your DMX cables are firmly seated and that each fixture has its DMX address set correctly on the fixture itself.

Control up to 12 separate fixtures (each with 20 channels). 240 Channels: Total DMX channel capacity. Check DMX address mapping, cables, and ensure the

Understanding the physical layout of the Disco 240 is essential for efficient programming and live operation. The console surface is split into distinct functional zones. Front Panel Anatomy

Once you’ve saved multiple scenes, you can play them back automatically: Auto Mode: button so the Auto LED lights up.

6 chases can be programmed, with up to 40 steps each. Modes: Auto, Music, or Manual mode. DMX Output: Standard 3-pin XLR connection. 2. Initial Setup and Safety If your lights are misbehaving, check this checklist:

Write a "fixture map" on paper: Channel 1 = Pan, Channel 2 = Pan Fine, Channel 3 = Tilt, Channel 4 = Dimmer, Channel 5 = Color, etc.

Press the (or MIDI/Add) button to save this step. The panel LEDs will flash to confirm acceptance.

: Select a Bank and Scene you previously saved, then press MIDI/Add . Repeat this for every step in your chase. Exit : Hold Program to save. 5. Playback & Live Control