Connecting the chiller’s alarm output to your laser CNC controller is . If the chiller fails, it must signal the laser to shut down instantly to prevent total thermal destruction of the laser source.
A manual must foreground safety because misuse can produce injury or damage. This section translates regulatory language into actionable rules for technicians: lockout/tagout procedures, grounding requirements, PPE, and warnings about hot surfaces, moving parts, or hazardous voltages. It also maps mandatory inspection intervals and disposal/transportation constraints for hazardous components (e.g., batteries, capacitors).
Operating ambient temperature should be between 5°C and 40°C. Operating above 43°C will trigger ultrahigh room temperature alarms. cwfl-6000 manual
Connect the three phase wires (U, V, W) and the ground wire (PE) securely to the main circuit breaker inside the electrical cabinet.
: A critical troubleshooting section that defines alarm codes (e.g., E1 for ultrahigh room temperature, E2 for ultrahigh water temperature). General User Feedback Comprehensive Troubleshooting Connecting the chiller’s alarm output to your laser
Install the chiller on a level, solid floor capable of supporting its full weight (with water).
If you need help resolving a specific alarm code or require the for your specific model year, please let me know. Tell me the exact alarm code you are facing or your regional input voltage so I can provide customized guidance. Share public link Its foundation is a
Up to 14kW (depending on environmental conditions and water temperature). Dual Cooling Circuit:
Understanding the technical limits of the CWFL-6000 ensures safe operation and optimal cooling performance. Specification Up to 14.2kW to 15.5kW (depending on operating conditions) Power Supply Options 3-Phase 380V 50Hz / 3-Phase 460V 60Hz Refrigerant Type R-410a / R-407c (environmentally friendly) Pump Power 1.1kW to 1.5kW Max. Pump Pressure 5.2 bar to 6.2 bar Max. Pump Flow Water Tank Capacity Inlet / Outlet Sizes G1" (Laser source) / G1/2" (Optics) Net Weight ~140 kg (308 lbs) Dimensions (LxWxH) ~93 x 64 x 132 cm 2. Installation and Setup Unpacking and Positioning
Designed specifically for demanding applications, the CWFL-6000 is not a standard cooler. Its foundation is a , a crucial feature that allows it to simultaneously manage the distinct cooling needs of a 6kW laser source and its optical components, preventing the condensation and thermal stress that can degrade beam quality and shorten component lifespan.