Canon Service Tool V5510 [upd] -

Move down to the section, select Main , and click Set again to ensure the counter reads 0%.

The Canon Service Tool V5510 will if your printer is turned on normally. The tool will display error codes like "Error 006" or "Error 002" if the printer is not in Service Mode.

The software cannot communicate with the printer correctly. canon service tool v5510

Click the button located directly to the right of it. The printer will feed a sheet of paper and print a single line of code confirming the reset. Move down to the Ink Absorber Counter section. Ensure the Counter Value (%) is set to 0 . Click the corresponding Set button.

V5510 is compatible with a wide range of Canon models, including: Move down to the section, select Main ,

the printer completely (do not unplug the power cord).

Turn off the printer using its Power button to save the settings. Turn it back on normally. The error message should be gone. Physical Maintenance The software cannot communicate with the printer correctly

: Generates a detailed diagnostic report of the printer's history. How to Prepare Your Printer

Unlike the standard driver software, the Service Tool communicates directly with the printer’s firmware (EEPROM) to reset internal counters and perform maintenance tasks that are otherwise locked to the user.

While holding , press and hold the Power button. The power LED will light up.