Canon Iradv 4245 Firmware Download Install |work| Jun 2026

Turn off the copier. Turn it back on while holding down the 1 and 7 keys simultaneously to enter Download Mode. Run SST: Open the Canon Service Support Tool. Select Device: The SST should detect the iR-ADV 4245 Select Firmware: Choose the downloaded firmware files. Start Upgrade: Click "Start" to begin the installation.

If you are not a certified Canon technician, you can permanently disable your device. There is no consumer-level benefit to SST over the RUI or USB methods.

Navigate to the official website for your region. Type imageRUNNER ADVANCE 4245 into the product search bar. Click on the Drivers & Downloads tab. Select your operating system. Look for the Firmware or System Software section. canon iradv 4245 firmware download install

In SST, select the iR-ADV 4245, select the downloaded firmware files, and click the "Download" button. Phase 4: Post-Installation Checklist After the update is complete: Reboot: Turn the machine off and back on again.

Ensure the copier is connected via Ethernet to your network. Canon iR-ADV 4245 Firmware Download Turn off the copier

This is the safest method if your network is unstable.

: Improves scanning speed, UI responsiveness, and mobile printing support. Select Device: The SST should detect the iR-ADV

Print a Configuration Page to see your current firmware version.

Hold down the keys simultaneously on the numeric keypad. Turn the main power switch ON while holding these keys.

The firmware on the machine is already newer than or the same as the one you are trying to install.