Adjustment Program Reset Epson R290

When the printer estimates these pads are full (usually after 1–3 years of heavy use), it triggers a error or flashing lights (often the two red LEDs alternating) and locks up completely. The Adjustment Program is a third-party software tool that resets this counter to zero.

Before starting, ensure your printer is connected to your computer via

The screen showed a 100% saturation level. With a shaky hand, Leo clicked . adjustment program reset epson r290

Press the physical power button on your Epson R290 to turn it off. Click on the computer screen dialogue box. Wait about 10 seconds, then turn your printer back on.

Click the "Select" button. A new window will appear. Choose "Epson R290" from the list of models and verify the correct USB connection port. Click "OK". When the printer estimates these pads are full

Before attempting the reset, ensure you have a Windows-based PC. Most Epson service utilities require Windows compatibility mode if you are running newer operating systems like Windows 10 or Windows 11. Step 1: Preparation

Epson does officially release its Adjustment Program to the public. This software is designed for authorized service centers. Consequently, you must download it from third-party websites, often shared by printer technicians. With a shaky hand, Leo clicked

Resetting the digital counter tells the printer's motherboard that the pads are empty, but it .

Click the button. The software will communicate with the printer and display the current point count and percentage of the waste ink pad.

Resetting the software counter does not physically clean the ink pads. If you have done this reset multiple times, the pads may actually be full, causing ink to leak from the bottom of your printer.

Every time your Epson R290 cleans its printhead or primes the cartridges, it pumps excess ink through a tube into an internal absorbent foam pad located at the bottom of the machine.